Equipment
Special Asphalt Products carries a comprehensive line of new and used equipment for purchase and rental. Contact us for availability, specific equipment requests and pricing.
Cimline Magma M-Series 230 Gallon
The New MAGMA M2 is the workhorse of the industry. With 230 Gallons, dual loading doors and tandem axles, the 230 MAGMA M-Series melter/applicator gets the job done.
The reputation of the MAGMA for simple, safe, sustainable operation lives on with the MAGMA M-Series which marks a new chapter for Cimline with signature safety green paint. Going green means more than a paint color change as the MAGMA becomes a new standard with lower emissions, lower fuel consumption and quieter operation for a better work environment. MAGMA’s most popular features of low-profile design, high production and easy to use operator features continue to make Cimline the leader in crack sealing.
ERGONOMIC SIMPLICITY: MAGMA offers the highest levels of operator comfort with a completely redesigned delivery system. The No-Stress boom swivels around the heated sealing hose unlike any other machine, minimizing hose stress and providing industry leading operating range. Add the new heated wand option for even better comfort and ease of use.
COMMUNITY AND OPERATOR FRIENDLY: The clean Tier IV compliant Diesel engine runs at the lowest possible RPM for the best combination of performance and fuel economy. The standard noise abatement muffler when combined with the engine cover option reduces noise levels up to 40% when compared to other models.
SIMPLE-SEAL CONTROLLER: Simple-Seal is the next generation of digital control providing the easiest operation yet. Simply set the mode switch to “RUN”. When the (3) Green LED’s come on, start working. At the end of the day set mode switch to “CLEAN OUT” run for 2 minutes and set mode switch to “OFF”. The control box never needs to be opened for normal operation.
Cimline M Series Magma Melter/Applicators Brochure (page 1)
Cimline M Series Magma Melter/Applicators Brochure (page 2)
Cimline M Series Magma Accessories
Cimline M Series Magma Demonstration Video
Cimline Magma GEN IV Demonstration Video
Cimline Magma M1 - 150 Gallon Melter/Applicator
Get the performance of the bigger model in a smaller package with single axle that can be towed with a ½ ton pick up.
- More effective method for controlling sealant fumes and emissions reduces smoke and odor from melting sealant by more than 95-percent
- No contact loading chute provides safe loading of sealant
- New hose carrier relieves operator of hose weight to increase performance and safety
- New material level indicator keeps the operator informed for maximum productivity
Cimline M Series Magma Melter/Applicators Brochure (page 1)
Cimline M Series Magma Melter/Applicators Brochure (page 2)
Cimline M Series Magma Accessories
Cimline M Series Magma Demonstration Video
Cimline Magma GEN IV Demonstration Video
* Available for purchase only
Cimline Magma M-Series 410 Gallon Capacity
The MAGMA M4 is the biggest/ baddest melter in the industry. With 410 Gallons, dual loading doors and tandem axles, the M4 puts the product down.
Conveyor belt makes loading crack sealant blocks easy!
* Available for purchase only
Cimline M Series Magma Melter/Applicators Brochure (page 1)
Cimline M Series Magma Melter/Applicators Brochure (page 2)
Cimline M Series Magma Accessories
Cimline M Series Magma Demonstration Video
* Available for purchase only
Cimline PCR-30 Crack Routers
- Smooth power with minimum vibration
- Adjustable shock-mounted handles designed for operators of any height
- Simple start-up and operation
Marathon Mastic Mixer
- Designed to heat and mix aggregate filled repair mastic and flexible bridge joint materials
- Hydraulic agitation assembly capable of gently lifting material from bottom of reservoir and turning material while suspending aggregate filled materials with a specific gravity as high as 3.0
Trailer Mounted Dura Patcher Spray Patcher
- Air feeds and propels aggregate and emulsion to the nozzle at up to 135 lbs. per minute
- Aggregate feed system passes up to 2-1/2 inch rock and is regulated by engine rpm providing infinite adjustment for job-site conditions
- Boom system ergonomically designed for easy, natural movement without fatigue
- Self-cleaning Vent-Flo nozzle patches close to traffic without overspray
Trailer Mounted Dura Patcher Spray Patcher Brochure (page 1)
Trailer Mounted Dura Patcher Spray Patcher Brochure (page 2)
Diagram of Dura Patcher Process
LAB Hot Air Lance
- Helps to maximize adhesion of crack sealant
- Enables crews to work after recent rainfall, dew or cold temperatures
- Adjustable temperature and air volume controls
SR-300 Pickup Unit
- 300 gallon steel tank with 7 gauge head, 10 gauge sidewalls
- Hydraulic agitation with infinitely variable speed forward and reverse
- Full sweep 4 paddle agitation system with 3/8” rubber wiper blades on each paddle for a cleaner tank
- 30 gallon Jenny air compressor powered by a 13 HP electric start Honda
- 1 1/2” Wilden air-operated, dual-diaphragm pump that can handle sand - only needs to be cleaned for winterization
- Hannay 100’ hose reel with 100’ of 3/4” 300 psi Goodyear hand hose and 6 1/2’ aluminum spray wand
- 3 gallon filter pot for reduced spray tip clogging
- 25” gasketed manway with sand grate, bag splitter, inner splash lid and lockable outer lid
* Available for purchase only
SR-700 Skid Unit
- 700 gallon steel tank with 7 gauge heads and 10 gauge sidewalls
- 30 gallon Jenny air compressor powered by an electric start Honda GX390 (13HP) motor
- 50’ of air hose and a quick connect
- Hydraulic agitation with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
- 25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid
- 2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads, and only needs to be cleaned for winterization
- 3 gallon filter pot that reduces down time
- Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand (Hose reel is available mounted or unmounted, swivel feature is only available if the hose real is mounted on the unit)
* Available for purchase only
Seal-Rite SR-1,250 Skid Unit
- 1,250 gallon steel tank with 7 gauge head, 10 gauge sidewalls and reinforced tank ends
- 30 gallon Jenny air compressor powered by an electric start Honda GX390 (13HP) motor
- 50' air hose and quick connect
- Hydraulic agitation featuring a 4” agitator shaft with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
- 25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid
- 2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads, and only needs to be cleaned for winterization
- 3 gallon filter pot that reduces down time
- Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand (Hose reel is available mounted or unmounted, swivel feature is only available if the hose real is mounted on the unit)
* Available for purchase only
SR-1500 Skid Unit
- 1,500 gallon steel tank with 7 gauge heads and 10 gauge sidewalls
- 30 gallon Jenny air compressor powered by an electric start Honda GX390 (13HP) motor
- 50’ of air hose and a quick connect
- Hydraulic agitation featuring a 4” agitator shaft with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
- 25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads, and only needs to be cleaned for winterization
- 3 gallon filter pot that reduces down time
- Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand (Hose reel is available mounted or unmounted, swivel feature is only available if the hose real is mounted on the unit)
*Available for purchase only
SR-2000 Skid Unit
- 2,000 gallon steel tank with 7 gauge heads and 10 gauge sidewalls
- 30 gallon Jenny air compressor powered by an electric start Honda GX390 (13HP) motor
- 50’ of air hose and a quick connect
- Hydraulic agitation featuring a 4” agitator shaft with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
- 25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid
- 2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads, and only needs to be cleaned for winterization
- 3 gallon filter pot that reduces down time
- Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand (Hose reel is available mounted or unmounted, swivel feature is only available if the hose real is mounted on the unit)
* Available for purchase only
SR 700 Trailer
• 700 gallon steel tank with 7 gauge heads and 10 gauge sidewalls
• 2 5/16” Bulldog hitch with 12,500 lb. capacity, a breakaway switch and adjustable 26,400 lb. safety chains
• Enclosed tongue and front deck with removable swing open gates on each side, with room for a blower and grazor
• 30 gallon Jenny air compressor powered by an electric start Honda GX390 (13HP) motor
• 50’ of air hose and a quick connect
• Hydraulic agitation with infinitely variable speeds in forward and reverse, complete with a full sweep, four paddle agitation system with 3/8” thick rubber wiper blades on each paddle that rub the sidewalls for a cleaner tank
• Two 6,000 lb. axles, both equipped with electric brakes and 16” load range E, 10 ply tires on 8 hole wheels
• 25” gasketed manway with a sand grate, bag splitter, inner splash lid and lockable outer lid
• 2” Wilden air-operated, dual-diaphragm pump that can handle heavy sand/additive loads, and only needs to be cleaned for winterization
• 3 gallon filter pot that reduces down time
• Hannay 150’ swivel mount hose reel, with 100’ of 3/4” 300 psi hand hose and a 6 1/2’ aluminum spray wand
• Brake lights, running lights, a center light bar and a lighted license plate bracket
Bonus Features
• Add the water tank without losing any space on your unit!
• The compressor also supplies air for your tires, allows cleaning of small cracks and runs pneumatic tools!
• The front deck is large enough to hold (2) 13 HP Billy Goat Force Blowers!
• These fenders won’t sag, no matter how many people or bags of sand you put on them!
• Enclosed storage areas in front and back of unit are great for storing smaller items such as spray tips, wrenches, screwdrivers, hammers and caution tape!
*Available for purchase only