Crack sealing is an extremely important and vital step in your asphalt maintenance program. Sealing cracks prevents water and moisture penetration below your asphalt and eliminates the most common cause of premature asphalt pavement failure and deterioration.
Crack and Joint Sealants
- Hot applied
- Single component
- Elastically modified composition of asphalt cement
- Ask us about meltable packaging option
Meltable Packaging Demonstration Video
Description
SA Premier is a fast curing, premium quality, hot applied single component crack and joint sealant. Our best all around sealant. Only the most appropriate high quality synthetic elastomers, polymers, and anti-oxidants meeting exacting standards are used in combination with select asphalt plasticizers and naturally occurring reinforcing materials. The sealant contains no solvent, is highly waterproof and resistant to a wide range of salts, bases, and organic materials. When properly sampled and heated to maximum temperatures in accordance with ASTM D-5167, SA Premier meets or exceeds modified ASTM D-6690 Type 1, ASTM D-6690 Type II, modified AASHTO and FAA specifications.
Use
SA Premier is an excellent sealant for road, airport and parking area applications for sealing longitudinal and traverse joints and random cracks for asphalt or concrete pavements where a fast curing sealant is desirable. The material’s superior combination of fast melting, low viscosity and above high and low temperature properties result in a sealant preferred by man experienced applicators and end users alike.
View Product Data Sheet
Product Description
SA PG 64-22 Tack is a hot applied, elastically modified composition of asphalt cement and other modifiers. The sealant contains no solvent, is pre-mixed and packaged, and conforms to the requirements of the specification designated herein. SA PG 64-22 is comparable to AR4000.
Common Uses
- Seam seal
- Joint Adhesive
- Tack Coat
View Product Data Sheet
Description
SA PLF 210 is a Premium Grade, hot applied, single component, elastically modified composition of asphalt cement, virgin
synthetic polymer, premium rubber, and other modifiers, which results in a Fast Set Up sealant.
Use
SA PLF 210 is a moderate viscosity pavement preservation sealant ideally suited for parking lots, slow vehicle and pedestrian areas, plus
highway, street and aviation applications for sealing longitudinal and transverse joints and random craks in Asphalt or Concrete pavements
where a firm yet pliable material is desirable. Properly installed, SA PLF 210 is an effective barrier against damage from debris and moisture
infiltration into cracks and joints within regions experiencing moderate high and moderate low pavement temperatures.
View Product Data Sheet
Description
SA 102 HV is a hot applied, single component, elastically modified composition of asphalt cement, virgin synthetic polymer, premium rubber, and other modifiers. The sealant contains no solvent, is pre-reacted and conforms to the requirements of ASTM D6690 Type II, ASTM D3405, AASHTO M324 Type II and AASHTO M301. Material is tested for low temperature performance at -20°F (-29°C) using 50% extension.
Use
SA 102 HV is a moderate high viscosity pavement preservation sealant intended for highway, street and aviation applications for sealing longitudinal and transverse joints and random cracks in Asphalt or Concrete pavements where of high levels of recycled material is desirable. Properly installed, 102HV is an effective barrier against damage from debris and moisture infiltration into cracks and joints within regions experiencing moderate high and low pavement temperatures.
View Product Data Sheet
Description
SA 103 HV is a hot applied, single component, elastically modified composition of asphalt cement, virgin synthetic polymer, recycled rubber, and other modifiers. The sealant contains no solvent, is pre-reacted and conforms to the requirements of ASTM D6690 Type I, ASTM D1190, AASHTO M324 Type I, AASHTO M173 and Federal Specification SS-S-164. Material is tested for low temperature performance at 0° F (-18°C) using 50% extension.
Use
SA 103 HV is a moderate high viscosity pavement preservation sealant intended for highway, street and aviation applications for sealing longitudinal and transverse joints and random cracks in Asphalt or Concrete pavements where use of high levels of recycled material is desirable. Properly installed, SA 103HV is an effective barrier against damage from debris and moisture infiltration into cracks and joints within regions experiencing moderate high and moderate low pavement temperatures.
View Product Data Sheet
Description
SA200 is a hot applied, single component, elastically modified composition of asphalt cement, virgin synthetic polymer, recycled rubber, and other modifiers. The sealant contains no solvent, is pre-reacted and conforms to the following requirements of the specification designated herein and conforms to the requirements of many state DOT specifications.
Use
SA200 is a moderate high viscosity pavement preservation sealant intended for highway, street and aviation applications for sealing longitudinal and transverse joints and random cracks in Asphalt or Concrete pavements where use of high levels of recycled material is desirable. Properly installed, SA200 is an effective barrier against damage from debris and moisture infiltration into cracks and joints within regions experiencing moderate high and moderate low pavement temperatures.
View Product Data Sheet
Description
SA 210 is a Premium Grade, hot applied, single component, elastically modified composition of asphalt cement, virgin synthetic polymer, premium rubber and other modifiers, which results in a fast setting, self leveling and quick melting sealant.
Use
SA 210 is a moderate viscosity pavement preservation sealant ideally suited for parking lots, slow vehicle and pedestrian areas, plus highway, street and aviation applications for sealing longitudinal and transverse joints and random cracks in asphalt or concrete pavements where a firm yet pliable material is desirable. Properly installed, SA 210 is an effective barrier against damage from debris and moisture infiltration into cracks and joints within regions experiencing moderate high and moderate low pavement temperatures.
View Product Data Sheet
Description
Loop Sealant is a single component, hot melt, rubberized asphalt sealant designed for use in the installation of traffic detection devices. Loop Sealant conforms to the requirements of Hot-Melt Rubberized Asphalt “Detector Loop Sealant.”
Use
Loop Sealant is a pre-reacted sealant which can be applied immediately after application temperature is reached. Loop Sealant must be heated in a jacketed, agitated melter utilizing oil as a heat transfer medium and designed for melting and installing hot applied loop sealant.
View Product Data Sheet
Description
The workhorse of the Nuvo line, CS materials provide consistent results in a wide range of climates. A perfect mix of convenience and performance, Nuvo CS delivers high performance at a moderate cost.
Use
NUVO CS is ideal for highways, county roads, municipal streets, parking lots, airports and pathways.
View Product Data Sheet
Description
With exceptional performance and value, Nuvo Elite sealants belong in a class of their own. Formulated from the finest raw materials, they offer the greatest range of benefits and versatility available from any hot pour crack sealant. Nuvo Elite is the premium choice for your pavement maintenance.
Use
Nuvo Elite is formulated with a low viscosity for maximum crack penetration, it is ideal for highways, county roads, municipal streets, parking lots, airports and pathways.
View Product Data Sheet
Flexible Repair Mastics
When the damage has progressed beyond the limits of sealing and filling. NUVO Gap is a rubberized hot pour patching material designed to repair wide cracks, rutting and depressed broken-up areas in asphalt and concrete pavements surfaces. When applied properly it creates a load bearing, weather resistant, durable bond resulting in long term pavement maintenance solutions.
Description
Nuvo GAP is hot-applied polymer modified asphalt mixed with engineered aggregates and modifiers designed to fill wide cracks and potholes to prevent water infiltration and restore ride quality. Nuvo GAP is designed as a permanent repair solution for wide thermal cracks, potholes, rutting and depressed broken-up areas. It is also recommended for use around solid structures in flexible pavements like manholes, gutters, and drains.
View Product Data Sheet
Product Demonstration Videos
Description
Fibrecrete “G” is a polymer modified synthetic resin based flexible repair system that consist of polymers, graded mineral fillers, recycled tire rubber, fiberglass and steel fibers, and hardened granite aggregate.
View Product Data Sheet
Product Demonstration Videos
Description
SA Bridge Bond blend of modified asphaltic binders, select aggregates and other modifiers pre-measured and combined to create an all in one meltable package of asphaltic joint material.
- Durable – Highly resistant to water intrusion and a wide range of salts, bases and organic materials.
- Accurate – Factory blended materials ensure consistent results and eliminates field mix errors joint after joint.
- Economical – Joints can be completed with a small crew and minimal equipment. No compaction is required.
- Minimum traffic interruption– Installation can be done with single lane work zone. Completed joint is ready for traffic as soon as it’s cooled.
Use
SA Bridge Bond is intended for use, in either exposed concrete or asphalt overlaid decks, as a replacement for existing small movement expansion devices or as a first installation small movement joint.