Sealers & Emulsions

Asphalt Sealers

Our hard based asphalt emulsion sealcoats Resurfacer and Resurfacer XLR8 grades are easy to use and cure to an extremely attractive, tough, wear-resistant smooth surface able to handle traffic within hours after application. All grades of product are manufactured from a special emulsion and embodied with select granular fillers and polymer additives. For special projects with weather limitations and/or specification requirements, our products can be plant-blended for enhanced performance. Our seal coats are proven performers in a wide range of commercial and residential applications with professional and long-lasting results.

Asphalt Sealers & Primers

Resurfacer—General Purpose Asphalt Emulsion Sealcoat

Easy-to-Use Protection for your Pavement

Resurfacer is a hard-based asphalt emulsion sealcoating that is easy to use and cures to an extremely attractive, touch, wear-resistant and smooth surface.

Special Asphalt Products formulates Resurfacer with a combination of specially refined asphalt emulsions, mineral fillers, advanced polymer modifiers and pigments. Resurfacer is a proven performer in a wide range of both commercial and residential applications and provides the pavement maintenance professional with a complete range of benefits.

  • Extends the life of pavement—protecting it from salts, chemicals petroleum products and elements which break down asphalt
  • Highly wear-resistant, non-skid surface
  • Asbestos free—safe even for schools and restaurants
  • Contains no organic fibers for extreme stability
  • Excellent hot and cold weather performance
  • Easy squeegee or spray application
  • Protects pavement at a minimum cost

View Product Data Sheet

Resurfacer XLR8—Fast Curing / High Solids Sealcoat

High-Tech Asphalt Sealcoating

Resurfacer XLR8 is a technologically-advanced, asphalt emulsion sealcoating that is easy to use and can be ready for traffic in as little as two hours.

Special Asphalt Products formulates Resurfacer XLR8 with a combination of specially refined asphalt emulsions, mineral fillers, advanced polymer modifiers and pigments.Resurfacer XLR8 is a proven performer in a wide range of both commercial and residential applications and provides the pavement maintenance professional with a complete range of benefits.

  • Significantly reduced curing time: two hours under optimal conditions: four hours overnight
  • One-coat application
  • Longer lasting—extends the life of pavement—protecting it from salts, chemicals petroleum products and elements which break down asphalt
  • Highly wear-resistant, non-skid surface
  • Asbestos free
  • Contains no organic fibers for extreme stability
  • Excellent hot and cold weather performance
  • Easy hand squeegee, motorized squeegee or spray application

View Product Data Sheet

Rhino Seal—Difficult Surfaces

Doubles as Primer & Sealer

Rhino Seal is a specialty coating that doubles as an effective primer and sealer for problematic surfaces. It is fast drying, self-curing, water-based, acrylic modified bituminous emulsion that bonds well to surfaces contaminated by oil, grease, fuel, etc., as well as to polished, smooth aggregates in the pavement. It is a spray applied or broom applied finished protective sealcoat for asphalt surfaces. This product is designed for use on asphalt to help protect against water penetration, oxidation and deterioration of asphalt surfaces.

  • Works as both a primer and sealer
  • Bonds well with contaminated and polished surfaces

View Product Data Sheet

Oil Spot Sealer / Primer

Oil Spot Primer is a quick drying modified barrier coating, formulated to coat and promote adhesion over oil, grease, and gasoline spots prior to application of asphalt based sealers on asphaltic surfaces. Recommended uses include parking lots, driveways, and any asphaltic surfaces.

View Product Data Sheet

Asphalt Emulsions

CSS-1—Slow Setting Tack Coat

Product Description

CSS-1 is a cationic emulsion primarily used as a tack coat. The emulsion is used as a tack coat (either as is or diluted 50% with water) or fog seal (diluted 50% with water) and applied with a distributor. CSS-1 consists of specially refined asphalt dispersed in water without the use of clay or similar substances as emulsifying or stabilizing agents. The cationic emulsified asphalt furnished under this specification shall be an emulsion of asphalt cement, water and emulsifying agent. The emulsified asphalt shall be homogeneous. It shall show no separation of asphalt after thorough mixing within 30 days after delivery.

Common Uses

CSS-1 tack coat emulsion is used to bond old pavement to new in many types of applications including: overlays of new pavement to old, pothole patching, joint, curb and gutter interfaces. CSS-1 is also used to bond speed bumps and parking stops onto existing asphalt pavement.

View Product Data Sheet

CRS-1—Rapid Setting Tack Coat

Product Description

CRS-1 is a cationic emulsion primarily used as a tack coat. The emulsion used as a tack coat (either as is or diluted 50% with water) or fog seal (diluted 50% with water) and applied with a distributor. CRS-1 consists of specially refined asphalt dispersed in water without the use of clay or similar substances as emulsifying or stabilizing agents. The cationic emulsified asphalt furnished under this specification shall be an emulsion of asphalt cement, water and emulsifying agent. The emulsified asphalt shall be homogeneous. It shall show no separation of asphalt after thorough mixing within 30 days after delivery.

Common Uses

CRS-1 tack coat emulsion is used to bond old pavement to new in many types of applications including:

  • overlays of new pavement to old
  • pothole patching, joint, curb and gutter interfaces
  • bond speed bumps and parking stops onto existing asphalt pavement

View Product Data Sheet